Siloxa-Tek 8505 - 1 Gallon Makes 4 Gallons (Concentrated)

  • Sale
  • Regular price $655.50
Shipping calculated at checkout.


Defend your concrete from water ingress, deicing salts and oil with confidence. This water-based formula makes oil and grease stains easier to clean, and resists freeze-thaw damage, mold and mildew. It's the perfect sidekick for even the most mobile voyager.

Application - Ultra Concentrate 1 Gallon Makes 4 Gallons

  1. Always test a small area before application to ensure desired performance, aesthetics, coverage rates and to verify application technique. Let test area dry thoroughly, 5-7 days, before inspection.
  2. Always mix the concentrate with 3 parts water prior to application. Distilled water is recommended for maximum performance. Stir material throughly before and during application.
  3. Two wet-on-wet coats are needed to ensure complete coverage. Apply with a roller, brush or low-pressure non-atomizing sprayer. Apply to saturation and let the first coat penetrate for 5-10 minutes then reapply a second coat in the same saturating manner. Less material will be needed for the second coat. Roll or broom out any puddles until the sealer penetrates the substrate. If it starts to rain, stop treatment and cover the impregnated areas.

Dry Time

Typical drying time is 4-6 hours at 70°F and 50% relative humidity. Cooler temperatures or higher relative humidity can extend the drying time. Treated surfaces will be ready for pedestrian and vehicle traffic within 24 hours. Water repellency will continue to develop within 7 days of application.

Clean Up

Clean equipment, tools and surfaces with hot soapy water. Unused or old material may be disposed of in a waste disposal site in accordance with local, state and federal laws.

Precautions/Safety

Avoid contact with skin, eyes and clothing, do not take internally. Use appropriate safety equipment during application and handling. Please refer to the safety data sheet (SDS) for additional precautionary instructions before use.

Best Performance

  • Proper application is the responsibility of the user.
  • Will not inhibit water penetration through unsound or cracked surfaces with defective flashing, caulking or structural waterproofing.
  • Spills should not be allowed to sit for extended periods of time, clean all spills in a timely manner.
  • Make sure the most current versions of product data sheets and safety data sheets are being used.

Coverage

1 coat: 150 - 400 square feet per gallon. 2 coats: 75 - 200 square feet per gallon. Variations in texture and porosity of substrate will affect the coverage and performance of the product.

Benefits

Use 8505 on a variety of concrete, brick and masonry applications where oil, grease, mold and mildew are the primary concern. It's easily applied with a low-pressure sprayer, roller or brush, and provides long-lasting ward to help you clean up the scum.

  • Concrete / Brick / Masonry
  • Concrete Blocks / Cinderblocks
  • Pavers / Exposed Aggregate
  • Slate / Stone / Stucco
  • Driveways / Sidewalks
  • Patios / Pool Decks
  • Garages
  • Excellent waterproofing - Penetrates deep within the concrete chemically reacting within the pores and capillaries creating a long-lasting hydrophobic surface that beads water
  • Resists staining from oil and grease - Oleophobic fluorocarbon makes oil and grease easier to clean from treated surfaces decreasing maintenance requirements
  • 100% breathable - Non-film forming. Allows moisture within the concrete to escape without adverse effects to the sealer. Does not trap moisture
  • Reduces moisture intrusion - Resists wind-driven rain, prevents freeze-thaw damage, spalling, pitting and cracking.
  • Resists atmospheric staining - Resists mold, mildew, lichen, efflorescence and dirt pick up
  • Improves durability - Prevents capillary uptake of water and the aggressive substances dissolved in it
  • Natural flat finish - Does not change surface appearance, UV stable will not breakdown with light exposure
  • Can be applied to cured, honed and polished concrete - Ideal for horizontal surfaces such as garage floors, compatible with silicate densifiers
  • Water based - Low VOC’s, environmentally friendly

View additional product details and specs here: https://ghostshield.com/product/siloxa-tek-8505